Yet One More Picture Tutorial To Add To Your Pinterest Board

If you will recall, I lamented to the masses about making the PERFECT picture for Kenyon's room several months ago (see: Minor Meltdown 9/12/14).  Well, I finally did it.  I finally finished a project and I must say, I think it looks pretty neat.

Although this is by no means the perfect way to make a sign, worked for me and thus the title: Yet One More Picture Tutorial To Add To Your Pinterest Board.  And if you don't know what Pinterest is; don't start.  Don't start unless you're willing to sacrifice both time with your family and large amounts of valuable sleep to learning 25 New Uses for Mason Jars! and Homemade Cures for Warts! and 10 Simple Crafts to Make With Your Toddler That Require Intense Concentration and Hours of Patience!  Okay, so I made up the last title, but you get my drift.

Also, I did not take many (any) pictures during the crafting process.  Why?  Well, because my hands were covered in hot glue and I couldn't get my one year old to take a non-blurry picture.  So there.  If you ever have questions, feel free to ask them below in the comment section and I'll try to address them as best I can.

First, I found a picture that I liked and edited it in Picasa, a free picture editing tool that you can download onto your computer.  While using Picasa, you can add text to your picture.  Click here for instructions courtesy of Centsational Girl.

After I added words to my picture, I emailed it to an office supply store where they blew it up to an incredibly large size.  I did not choose to have mine blown up as an "0Engineer Print"; rather, I chose to have it printed as a poster.  Is there a huge difference?  I have no idea.  It worked for me though.  The poster-sized print was printed on regular ol' printer paper..... save for the fact that it was incredibly huge.  The weight and feel of the paper was identical to printer paper, and that was what I wanted.  That is the medium that I am comfortable with.

I ran by the local hardware store to pick up some spray adhesive.  When looking at spray adhesive there are at least two types: semi-strong (good for things like 'pin the tail on the donkey' where you will stick and re-stick items time and again) and super-strong.  I chose to purchase the super-strong (approximately $7) which it equivalent to the Aqua-Net of hairsprays.  If you lived through the 90's you understand.  This stuff is STRONG.

I happened to have some 3/4" MDF laying around in my shop, which I chose to use as the backing for my picture.  It was left over from one of my endless 'honey-do' projects (see: Sunday Funday 9/14/14).  I am fairly confident (hahahahahaha) you could use something thinner and thus more lightweight such as a sheet of 1/4" plywood, but I also wanted to have some depth.  I'll explain in a few paragraphs.

This is the one part of my project where I needed an extra set of hands.  This always ticks me off as it means I have to wait until my husband comes home at night and I can't do it rightthisminute.  I had a piece of my MDF ready to go that was approximately 3x5'.  Why so large?  I knew that trying to lay a picture on top of a piece of lumber the EXACT same size would be nearly impossible, especially when using the Aqua-Net of spray adhesive.  Once you lay that picture down, it is down for all eternity.

So I sprayed my entire board a bit larger than the size of my actual picture.  Then, Wesley and I each took two corners of my picture, stretched them tight and laid it down on top of the sprayed area.  I took a stiff manilla folder and scraped it over the top of the picture to try and smooth out the few wrinkles there were.  In all actuality, once you lay down your picture, you're screwed.  You'd better do it well the first time.  If there are wrinkles, call it character and play them up somehow.

Once the picture was attached to the board I then used a jig saw and cut around the outer edge of the picture.  Was it a perfectly straight line?  Absolutely not.  That's why I used a hot glue gun to add a border around the edge using 1/4" jute (twine).  Going 'round and 'round with the jute was actually the longest part of this entire process.  I think it really added some character though, so I recommend you do it.

In the end, this is what we ended up with;

TA-DA!